NEC ELECTRA ELITE IPK II - Page 582

___________________________________________________________________________________
13 - 14 Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
7.4 Applying Power to the Base Unit
1. Power to charge the battery is supplied from the Telephone line.
2. An ACA-U Unit must be installed in the optional DC24V jack on the Base
Unit to provide power for the
D
term
Handset Cordless Terminal.
3. Plug the ACA-U Unit into a standard 120 Vac wall outlet.
4. The power level between the Handset and the Base is 10mW.
5. When the ACA-U Unit is used, route the power cord where it does not
create a trip hazard or where it could become chafed and create a fire or
electrical hazard.
Figure 13-9 D
term
Handset Cordless Terminal