NEC ELECTRA ELITE IPK II - Page 590

___________________________________________________________________________________
13 - 22 Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
5. Plug the other end of the short telephone cord in the modular
wall jack in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push
down until it is firmly seated.
7. Plug the AC adapter into a standard 120 Vac wall outlet.
 Do not use an outlet controlled by a wall switch.
Figure 13-17 Placing the Base Unit on the Posts of the Wall Plate
Figure 13-18 Plugging the AC Adapter into the AC Wall Outlet
Wide Blade
AC
Adapter