3 - 19
3 Operation and Test Run
High-function General-purpose Inverter 3G3RX-V1 User’s Manual (I578-E1)
3-3 Connections and Functions of CX-Drive
3
3-3-1 CX-Drive Connection Method
2
On the [Autodetect] tab, under [Drive Type Selection], check the [Inverter] box.
Then, under [Connection Type Selection], check the [Direct] box and click the [Advanced
Options: Direct] button to the right.
For the reduction of the automatic search time, deselect unnecessary check boxes to narrow
down the scope of autodetection.
3
In the [Advanced Options [Direct (X-Series)]] window, set communications options.
4
After setting communications options, click the [OK] button and close all windows. Then,
click [Autodetect].
The Autodetect function starts to create new drive projects automatically.
To Next Page
Loading...
