3.
Under Action, click .
The Encryption Management window appears.
Note
If the encrypted folder is locked, you must unlock it before configuring encryption settings. For
details, see Unlocking a Shared Folder.
4. Perform any of the following tasks.
Task User Action
Download the encryption key
file
a. Go to Download.
b. Enter the encryption password.
c. Click OK.
QTS exports the encryption key file to your computer as a TXT.
Save the encryption key a. Go to Save.
b. Select Mount automatically on start up.
When enabled, QTS automatically unlocks the shared folder after the
NAS restarts.
c. Enter the encryption password.
d. Click OK.
QTS saves the encryption key.
Lock the shared folder a. Go to Lock.
b. Optional: Select Forget the saved key.
Note
When selected, users must unlock the folder after
restarting the NAS.
This setting is only available if Save encryption key was
enabled when the folder was encrypted or Mount
automatically on start up was enabled after the folder
was encrypted.
c. Click OK.
QTS locks the folder.
Note
• Locked folders do not appear in File Station. A folder
will only reappear after it is unlocked.
• Users cannot edit the properties or permissions of a
locked shared folder.
Unlocking a Shared Folder
1. Go to Control Panel > Privilege > Shared Folders > Shared Folder .
2. Locate a locked shared folder.
QTS 4.5.x User Guide
Privilege Settings 89