Chapter 4 Configuring Your Library
Enabling Licenses
Scalar i2000 User’s Guide 105
The Licenses dialog box appears.
This dialog box lists the licensed features for your library, including their
status, expiration date, and quantity. The following guidelines apply to
Quantity:
• The COD quantity is the number of slots licensed.
• The partition quantity is either 1 or 16. The only possible multiple
number of partitions is 16.
• For features that are not licensed by quantity, such as the drive
monitoring feature, Quantity is always set to 1.
4 In the Enter License Key text box, type the appropriate license key.
5 Click OK.
You do not need to highlight the feature before you
enter a license key.
License keys are not case-sensitive, so if you are
using the library’s touch screen, enter the library
key from the lowercase keyboard, which gives you
access to the dash (-) character.
If you cannot locate the license keys shipped with
the library, you can obtain them by contacting
technical support or, if you are an end user, by
contacting your inside sales representative.
To Next Page
Loading...
Need help?
General