Quantum Scalar i2000 User Manual

Chapter 5 Maintaining Your Library
Monitoring the Library
Scalar i2000 User’s Guide 223
Displaying Power Supply Information 5
1 To display detailed information about the library’s power supplies,
click the Power Supply tab on the Sensor Status dialog box.
The following table describes the elements on the Power Supply tab.
2 To view current information, click Refresh.
Element Description
Name The name of the power supply sensor.
Wattage The amount of power in watts.
Type The type of power (AC or DC).
Location The location of the power supply within the library.

Quantum Scalar i2000 Specifications

General

Type	Tape Library
Form Factor	Rack-Mountable
Power Supply	Dual redundant power supplies
Humidity	20% to 80% non-condensing
Tape Technology	LTO
Drive Types	LTO-8, LTO-7, LTO-6
Interface	SAS, Fibre Channel
Encryption	AES 256-bit
Management Interface	Web-based GUI, SNMP
Scalability	Modular
Operating Temperature	10 to 35 °C