Chapter 5 Maintaining Your Library
Maintenance Actions
Scalar i2000 User’s Guide 262
Rescuing Library Configuration 5
Use the Rescue command to restore a library using the configuration
rescue image that is saved locally on the library’s file system.
If library configuration has occurred since the last time the image was
saved, those changes will be lost when the older configuration is restored.
The restore operation will succeed, but you will then need to reconfigure
the library, including the partitions and mappings. Therefore, it is
important to save the local rescue and/or remote restore image
periodically, especially following hardware configuration changes.
1 Log on as an administrator from the remote client. The Restore
command is not available from the library’s touch screen.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Tools→ Save/Restore.
The Save and Restore Library Configuration dialog box appears.
4 Click Rescue.
Be cautious if you plan to use a saved library
configuration image that is out of date. You might
restore configuration information that you do not
want, such as former passwords, partitions,
mappings, and hardware configurations.
To Next Page
Loading...
Need help?
General