Scalar i2000 User’s Guide 419
more information, see Working With Partitions on page 106. To learn
how to create a partition, see Creating Partitions on page 111.
Where can I find the library’s serial number? 1The serial number
appears in the ID column for the first line of output on the System Status
dialog box (Monitor→ System). Use the serial number when contacting
technical support for assistance.
How many characters can be in the barcodes? 1For LTO media
barcodes, the library dynamically supports 1 to 14 characters for volume
serial number plus a two-character media type identifier. The image
below is an example of a supported LTO barcode label.
For SDLT I media barcodes, the library dynamically supports 1 to 14
characters for volume serial number plus a one-character media type
identifier. The image below is an example of a supported SDLT I barcode
label.
For SDLT II media barcodes, the library dynamically supports 1 to 14
characters for volume serial number plus a one-character media type
identifier. The image below is an example of a supported SDLT II barcode
label.
two-character media
identifier (“L1”, “L2”, or “L3”)
character media identifier
must be an “S”
character media identifier
must be a “2”
To Next Page
Loading...
Need help?
General