R&S ZNL Series - Page 1015

Command reference
R&S
®
ZNL/ZNLE
1015User Manual 1178.5966.02 ─ 20
Usage: Query only
SYSTem:DATA:MEMory:RESet
Deletes all shared memory buffers initialized using SYSTem:DATA:MEMory:
INITalize.
For background information, see Chapter 9.4.3, "Memory-mapped trace data transfer",
on page 246.
Usage: Event
SYSTem:DATA:MEMory:SIZE?
Queries the size of the shared memory buffer that was last created using SYSTem:
DATA:MEMory:COMMit.
For background information, see Chapter 9.4.3, "Memory-mapped trace data transfer",
on page 246.
Usage:
Query only
SYSTem:... (other)
The following SYSTem... commands provide general instrument configurations.
SYSTem:CORRection:JOINcal...................................................................................... 1015
SYSTem:DATE............................................................................................................ 1016
SYSTem:DISPlay:CONDuctances..................................................................................1016
SYSTem:FREQuency?................................................................................................. 1016
SYSTem:PRESet:USER:CAL........................................................................................ 1017
SYSTem:SETTings:UPDate.......................................................................................... 1017
SYSTem:TIME.............................................................................................................1018
SYSTem:CORRection:JOINcal <FirstCal>, <LocationFirstCal>, <SecondCal>,
<LocationSecondCal>[, <OutputCal>[, <LocationOutputCal>]]
Command for joining calibrations.
●
The query returns whether the two calibrations <FirstCal> (from <LocationFirst-
Cal>) and <SecondCal> (from <LocationSecondCal>) are joinable.
●
The set command tries to join the two calibrations.
If successful, it stores the resulting calibration as <OutputCal> in <LocationOutput-
Cal>.
Parameters:
<FirstCal> String parameter with the channel name (for <LocationFirst-
Cal>=CHANnel) or the calibration file name (for <LocationFirst-
Cal>=POOL) of the first calibration.
<LocationFirstCal> CHANnel | POOL
VNA command reference