R&S ZNL Series - Page 429

VNA GUI reference
R&S
®
ZNL/ZNLE
429User Manual 1178.5966.02 ─ 20
Trace Info
Shows or hides the trace lists in the upper part of the diagrams.
Remote command:
DISPlay:ANNotation:TRACe[:STATe]
Info Table: Show / Position
Shows or hides the info table and defines its position.
The info table is a possible container for info fields and can be placed to the bottom, to
the left, or to the right of the screen. See also Chapter 10.10.4, "Info Field tab",
on page 456.
Remote command:
No command; display configuration only.
Info Window
Shows/hides the Info Window
Remote command:
DISPlay:IWINdow[:STATe]
Font Size
Scales the fonts in the diagrams. The scaling affects the trace and channel lists, and
the info fields.
Remote command:
DISPlay:RFSize
10.9.3.2 Info Window
The "Info Window" displays a configurable set of marker properties and Bandfilter
search results. It automatically resizes the displayed text to fit the window height and
width.
Access: [Display Lines] > "Config" > "Info Window" checkbox
Display Lines softtool