R&S ZNL Series User Manual

Command reference
R&S
®
ZNL/ZNLE
834User Manual 1178.5966.02 ─ 20
Example:
FORM REAL, 32
Select real data format.
SYST:COMM:GPIB:RTER EOI
Set the terminator to EOI.
(During a calibration) ... CORR:CDAT?
'REFLTRACK',1,0
Query a system error correction term. The data is transferred in
a definite length block which can be written to a file; the analyzer
displays the message "<no> bytes binary data received".
11.5.2.7 HCOPy commands
The HCOPy... commands control the output of screen information to an external
device. Part of the functionality of this system is included in the "File" menu.
HCOPy:DESTination...................................................................................................... 834
HCOPy:DEVice:LANGuage.............................................................................................835
HCOPy[:IMMediate]....................................................................................................... 835
HCOPy:ITEM:ALL..........................................................................................................835
HCOPy:ITEM:LOGO[:STATe].......................................................................................... 836
HCOPy:ITEM:MLISt[:STATe]........................................................................................... 836
HCOPy:ITEM:TIME[:STATe]............................................................................................ 836
HCOPy:PAGE:MARGin:BOTTom.....................................................................................837
HCOPy:PAGE:MARGin:LEFT..........................................................................................837
HCOPy:PAGE:MARGin:RIGHt.........................................................................................837
HCOPy:PAGE:MARGin:TOP...........................................................................................837
HCOPy:PAGE:ORIentation............................................................................................. 838
HCOPy:PAGE:WINDow..................................................................................................838
HCOPy:DESTination <PrinterName>
Selects a printer name or file as destination for the screen output.
Parameters:
<PrinterName> String variable containing the printer name. One of the printers
accessible from your PC. The following strings are supported in
addition:
'MMEM' - print to file. The file name is defined via
MMEMory:NAME. The command HCOPy:DEVice:LANGuage
selects the file format.
'DEFPRT' - use default printer, to be selected in the "Devices
and Printers" dialog of the Windows control panel.
*RST: n/a (*RST does not overwrite the printer destina-
tion)
VNA command reference

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English