R&S ZVB - Page 1018

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1003
Example:
See SOURce<Ch>:POWer<Pt>:ALC:AUBW
SOURce<Ch>:POWer<Pt>:ALC:CONTrol <Boolean>
[Deprecated command. Has no effect.]
Enables or disables individual ALC (Automatic Level Control) settings at source port <Pt>.
<Ch>
Channel number
<Pt>
Port number
<Boolean>
Enables (ON) or disables (OFF) individual ALC settings.
*RST value
OFF [–]
SCPI, Command Types
Device-specific, command or query
Example:
-/-
SOURce<Ch>:POWer<Pt>:ALC:COUPle <Boolean>
Enforces identical ALC settings for the individual ports in channel <Ch> (Couple Port Settings in ALC
Config dialog).
<Ch>
Channel number
<Pt>
Port number. This suffix is ignored; the setting applies to all ports.
<Boolean>
Enforces identical settings (ON) or enables port-specific ALC settings
(OFF).
*RST value
ON [–]
SCPI, Command
Types
Device-specific, command or query
Example:
See SOURce<Ch>:POWer<Pt>:ALC:AUBW
SOURce<Ch>:POWer<Pt>:ALC:CSTate <Boolean>
Enables or disables ALC (Automatic Level Control) for channel <Ch> (ALC Off item in Power Bandwidth
Average menu)
<Ch>
Channel number
<Pt>
Port number. This suffix is ignored; the setting applies to all ports.
<Boolean>
Enables (ON) or disables (OFF) ALC for channel <Ch>.
*RST value
ON [–]
SCPI, Command Types
Device-specific, command or query
Example:
See SOURce<Ch>:POWer<Pt>:ALC:AUBW