R&S ZVB - Page 1062

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1047
Types
Example:
STAT:QUES:INT?
Query the EVENt part of the QUEStionable:INTegrity register to check whether
an event has occurred since the last reading.
STATus:QUEStionable:INTegrity:HARDware:CONDition?
Returns the contents of the CONDition part of the QUEStionable:INTegrity:HARDware register. Reading
the CONDition registers is nondestructive.
*RST value
–
SCPI, Command
Types
Confirmed, query only
Example:
STAT:QUES:INT:HARD:COND?
Query the CONDition part of the QUEStionable:INTegrity:HARDware register to
detect current hardware failures.
STATus:QUEStionable:INTegrity:HARDware:ENABle
Sets the enable mask which allows true conditions in the EVENt part of the
QUEStionable:INTegrity:HARDware register to be reported in the summary bit. If a bit is 1 in the enable
register and its associated event bit transitions to true, a positive transition will occur in the summary bit
(bit 2 of the QUEStionable:INTegrity register).
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the status reporting system)
SCPI, Command
Types
Confirmed, command or query
Example:
STAT:QUES:INT:HARD:ENAB 394
Set bits no. 1, 3, 7, and 8 of the QUEStionable:INTegrity:HARDware:ENABle
register
STATus:QUEStionable:INTegrity:HARDware[:EVENt]?
Returns the contents of the EVENt part of the QUEStionable:INTegrity:HARDware register. Reading an
EVENt register clears it.
*RST value
–
SCPI,
Command
Types
Confirmed, query only
Example:
STAT:QUES:INT:HARD?
Query the EVENt part of the QUEStionable:INTegrity:HARDware register to