R&S ZVB - Page 1061

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1046
STATus:QUEStionable:PTRansition
Sets the positive transition filter. If a bit is set, a 0 to 1 transition in the corresponding bit of the associated
condition register causes a 1 to be written in the associated bit of the corresponding event register.
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the Status Reporting System)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:PTR 1536
Set bits no. 9 and 10 of the QUEStionable:PTRansition register
STATus:QUEStionable:INTegrity:CONDition?
Returns the contents of the CONDition part of the QUEStionable:INTegrity register. Reading the
CONDition registers is nondestructive.
*RST value
–
SCPI, Command
Types
Confirmed, query only
Example:
STAT:QUES:INT:COND?
Query the CONDition part of the QUEStionable:INTegrity register to detect
current hardware failures.
STATus:QUEStionable:INTegrity:ENABle
Sets the enable mask which allows true conditions in the EVENt part of the QUEStionable:INTegrity
register to be reported in the summary bit. If a bit is 1 in the enable register and its associated event bit
transitions to true, a positive transition will occur in the summary bit (bit 9 of the QUEStionable register).
<NRf>
0 to 65535 (decimal representation)
*RST value
– (see also Reset Values of the status reporting system)
SCPI, Command Types
Confirmed, command or query
Example:
STAT:QUES:INT:ENAB 4
Set bit no. 2 of the QUEStionable:INTegrity:ENABle register
STATus:QUEStionable:INTegrity[:EVENt]?
Returns the contents of the EVENt part of the QUEStionable:INTegrity register. Reading an EVENt
register clears it.
*RST value
–
SCPI, Command
Confirmed, query only