R&S ZVB - Page 1070

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1055
SYSTem:COMMunicate:RDEVice:GENerator<gen_no>:CATalog?
Queries the numbers of all configured external generators.
<gen_no>
Number of the configured generator. This suffix is ignored; the command affects
all generators.
Response
String parameter with a comma-separated list of generator numbers.
*RST values
*RST has no effect on the configured generators.
SCPI, Command
Types
Device-specific, query only
Example:
SYST:COMM:RDEV:GEN1:DEF 'Ext. Gen. 1', 'SME02', 'gpib0', '21'
SYST:COMM:RDEV:GEN2:DEF 'Ext. Gen. 2', 'SME02', 'gpib0', '22'
Configure two R&S SME02 generators as external generators no. 1 and 2,
assigning different names and GPIB addresses.
SYST:COMM:RDEV:GEN1:CAT?
Query the generator numbers. The response is '1, 2'.
SYST:COMM:RDEV:GEN1:COUN?
Query the number of configured generators. The response is 2.
SYSTem:COMMunicate:RDEVice:GENerator<gen_no>:COUNt?
Queries the number of configured external generators.
<gen_no>
Number of the configured generator. This suffix is ignored; the command affects
all generators.
Response
Number of generators.
*RST values
*RST has no effect on the configured generators.
SCPI,
Command
Types
Device-specific, query only
Example:
See SYSTem:COMMunicate:RDEVice:GENerator<gen_no>:CATalog?
SYSTem:COMMunicate:RDEVice:GENerator<gen_no>:DEFine '<gen_name>',
'<driver>', '<interface>', '<address>'[, <fast_sweep>, <10_MHz_Ref>]
Configures an external generator and adds it to the list of available generators.
<gen_no>
Number of the configured generator. Generators must be numbered in ascending
order, starting with 1. If a number is re-used, the previous generator configuration
is overwritten.
Generators can be assigned several times so that the number of configured
generators is practically unlimited.
'<gen_name>'
Name of the external generator (string parameter). An empty string means that no
particular name is assigned to the generator.