R&S ZVB - Page 666

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 651
TARGet
Target value (see CALCulate<Chn>:MARKer<Mk>:TARget)
RTARget
Next target value to the right of the current marker position
LTARget
Next target value to the left
BFILter
Bandfilter search. Bandfilter search. The results are queried using CALCulate<Chn>:MARKer<Mk>:BWIDth.
SPRogress
Sweep progress (marker tracking)
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STARt
Sets the beginning (start) of the sweep range equal to the stimulus value of the marker <Mk> on trace no.
<Chn>.
<Chn>
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10
Range [def. unit]
– [–]
*RST value
–
SCPI, Command
Types
Device-specific, no query
Example:
*RST; :CALC:MARK ON
Create marker 1 in the center of the current sweep range and assign it to
trace no. 1.
CALC:MARK:FUNC:STAR
Divide the sweep range in half, starting at the current marker position.
CALCulate<Chn>:MARKer<Mk>:FUNCtion:STOP
Sets the end (stop) of the sweep range equal to the stimulus value of the marker <Mk> on trace no.
<Chn>.
<Chn>
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10
Range [def. unit]
– [–]
*RST value
–
SCPI, Command
Types
Device-specific, no query
Example:
*RST; :CALC:MARK ON
Create marker 1 in the center of the current sweep range and assign it to
trace no. 1.
CALC:MARK:FUNC:STOP
Divide the sweep range in half, ending at the current marker position.