R&S ZVB - Page 723

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 708
embedding.
CALCulate<Ch>:TRANsform:VNETworks:GLOop:EMBedding:TNDefinition
FIMPort | SL | SC
Selects the circuit model for ground loop embedding.
<Ch>
Channel number.
Parameters
Possible circuit models (character data); see circuit models.
*RST value
FIMPort
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Ch>:TRANsform:VNETworks:GLOop:EMBedding[:STATe]
CALCulate<Ch>:TRANsform:VNETworks:PPAir:DEEMbedding<List_idx>:DEFine
<first port no>, <second port no>{, <first port no>, <second port no>}
Defines a list of port pairs for port pair deembedding. The command can be used repeatedly to extend or
overwrite the list.
<Ch>
Channel number
<List_idx>
List index, denotes the current number of the defined pair of ports within the list. If
several port pairs are defined, <List_idx> is the number of the first port pair.
<first port
no>,
<second
port no>
Two different analyzer ports
Range [def.
unit]
1 to 4 (depending on analyzer model) [–]
*RST value
–
SCPI,
Command
Types
Device-specific, no query
Example:
See CALCulate<Ch>:TRANsform:VNETworks:PPAir:DEEMbedding<List_idx>[:STATe]
CALCulate<Ch>:TRANsform:VNETworks:PPAir:DEEMbedding<List_idx>:DELete
Deletes the previously defined list of port pairs for port pair deembedding.
<Ch>
Channel number
<List_idx>
List index, is available for systematic reasons, but must be always 1 or omitted. The
list index in the other ...PPAir:DEEMbedding... commands denotes the current
number of a pair of ports within the list.