R&S ZVB - Page 962

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 947
Example:
SEGM:DEF:SEL DWEL
Select the meas. delay to determine the sweep time in a new sweep segment.
SEGM:DEF 1MHZ, 1.5MHZ, 111, -21DBM, 0.01S, 0, 10KHZ
Create a sweep segment with a sweep range between 1.0 MHz and 1.5 MHz
and a meas. delay of 10 ms.
SEGM:SWE:TIME?
Query the sweep time in the new segment.
[SENSe<Ch>:]SEGMent<Seg>:DELete
Deletes the specified (single) sweep segment (Del. Selected Segment).
[SENSe<Ch>:]SEGMent<Seg>:DELete:ALL deletes all segments in the channel.
<Ch>
Channel number
<Seg>
Sweep segment number
*RST value
–
SCPI, Command
Types
Device-specific, no query.
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default
settings.
SEGM:DEL
Delete the created segment.
[SENSe<Ch>:]SEGMent<Seg>:DELete:ALL
Deletes all sweep segments in the channel (Del. All Segments). [SENSe<Ch>:]SEGMent<Seg>:DELete
deletes a single segment.
<Ch>
Channel number
<Seg>
Sweep segment number. This suffix is ignored; the command deletes all
segments.
*RST value
–
SCPI, Command
Types
Device-specific, no query.
Example:
SEGM:ADD
Create a new sweep segment no. 1 in channel no. 1 using default settings.
SEGM:DEL:ALL
Delete the created segment and all segments in the channel created
before.