Ricoh U-C1 B051

xi
v
500-SHEET FINISHER (B458)
1. REPLACEMENT AND ADJUSTMENT..................................B458-1
1.1 EXTERIOR .........................................................................................B458-1
Front Cover....................................................................................B458-2
1.2 ENTRANCE UPPER GUIDE/PAPER EXIT UNIT...............................B458-4
1.3 ENTRANCE LOWER GUIDE.............................................................. B458-5
1.4 PAPER EXIT UNIT GEAR/PADDLE ROLLER SOLENOID................B458-5
1.5 STAPLER UNIT..................................................................................B458-6
1.6 JOGGER TRAY UNIT.........................................................................B458-6
1.7 PAPER EXIT SENSOR FEELER........................................................ B458-7
1.8 MAIN MOTOR .................................................................................... B458-7
1.9 JOGGER MOTOR ..............................................................................B458-8
1.10 CONTROL BOARD........................................................................... B458-8
1.11 OUTPUT TRAY UNIT.......................................................................B458-9
2. DETAILED DESCRIPTIONS ...............................................B458-10
2.1 OVERALL MACHINE INFORMATION..............................................B458-10
2.1.1 COMPONENT LAYOUT .......................................................... B458-10
Mechanical Component Layout....................................................B458-10
Drive Layout................................................................................. B458-11
2.1.2 ELECTRICAL COMPONENT LAYOUT ................................... B458-12
2.1.3 ELECTRICAL COMPONENT DESCRIPTIONS.......................B458-13
2.2 DETAILED SECTION DESCRIPTIONS............................................B458-14
2.2.1 OUTPUT TRAY MECHANISM.................................................B458-14
Stack Height Detection.................................................................B458-14
Output Tray Up/Down Mechanism ............................................... B458-15
2.2.2 PAPER FEED .......................................................................... B458-16
Straight Feed Out Mode............................................................... B458-16
Shift Sorting Mode........................................................................ B458-17
Stapling Mode..............................................................................B458-19
2.2.3 JAM CONDITIONS .................................................................. B458-20
2.2.4 ERROR DETECTION...............................................................B458-20
SPECIFICATIONS
SPECIFICATIONS......................................................................Spec-1
1. GENERAL SPECIFICATIONS (MAIN UNIT) ........................................ Spec-1
2. MACHINE CONFIGURATION .............................................................. Spec-3
2.1 SYSTEM COMPONENTS............................................................. Spec-3
2.2 OPTIONAL EQUIPMENT ............................................................. Spec-5
ARDF ............................................................................................. Spec-5
Bridge Unit ..................................................................................... Spec-5
By-pass Tray Unit........................................................................... Spec-6
Duplex Unit..................................................................................... Spec-6
Interchange Unit............................................................................. Spec-6