Ricoh U-C1 B051 - Test Pattern Printing (Sp5-955-1)

26 July 2002 DUMMY
5-63
Service
Tables
5.1.3 TEST PATTERN PRINTING (SP5-955-1)
1. Enter the SP mode and select SP5-955-1.
2. Enter the number for the test pattern that you want to print and press !. (See
the tables below.)
3. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
4. Press Start " to start the test print.
5. Press SP Mode (highlighted) to return to the SP mode display.
No. Test Pattern No. Test Pattern
0
None
23
1 dot Grid Pattern
(Reverse order of LD1/2 on)
1 Vertical Line (1-dot) 24 3 lines Grayscale
2 Horizontal Line (1-dot) 25 Horizontal Grayscale – 1
3 Vertical Line (2-dot) 26 Vertical Grayscale – 1
4 Horizontal Line (2 dot) 29 Horizontal Grayscale – 2
5 1 dot Grid Pattern0 – 1 30 Vertical Grayscale – 2
6 1 dot pair Grid Pattern – 1 31 Horizontal Grayscale (600 dpi)
7 Alternating Dot Pattern (1 dot) 32 Vertical Grayscale (600 dpi)
8 Alternating Dot Pattern (2 dot) 35 Horizontal Grayscale with White Line – 1
9 Full Dot Pattern 36 Vertical Grayscale with White Line – 1
10 Black band 38 Horizontal Grayscale with White Line – 2
11 Trimming Area (1 dot) 39 Vertical Grayscale with White Line – 2
12
Trimming Area (2 dot)
40
Horizontal Grayscale with White Line
(600 dpi)
13
Argyle Pattern (1 dot)
41
Vertical Grayscale with White Line
(600 dpi)
14 Argyle Pattern (2 dot) 43 Blank image
15 Horizontal Cross Stitch 50 Vertical Cross Stitch
16 Checker Flag 51 2 beam
19 Alternating Dot Pattern (4 dot) 52 Trimming Area with Crossed Lines
20
1 dot Horizontal Line
(Reverse order of LD1/2 on)
53
1 dot Grid Pattern – 2
21
1 dot Grid Pattern
(Reverse order of LD1/2 on)
54
1 dot pair Grid Pattern – 2
22
1 dot pair Grid Pattern
(Reverse order of LD1/2 on)
After finishing your tests, reset SP 5-955-1 to 0.