SERVICE PROGRAM MODE 26 July 2002
5-14
2
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
15 Thick/1st/-128
[0 ~ 70.0 / 24.0 / 0.1 µA/step]
16 Normal/2nd/-297
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
17 Normal/2nd/257-296
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
18 Normal/2nd/210-256
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
19 Normal/2nd/129-209
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
20 Normal/2nd/-128
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
21 Middle/2nd/-297
[0 ~ 70.0 / 45.0 / 0.1 µA/step]
22 Middle/2nd/257-296
[0 ~ 70.0 / 45.0 / 0.1 µA/step]
23 Middle/2nd/210-256
[0 ~ 70.0 / 45.0 / 0.1 µA/step]
24 Middle/2nd/129-209
[0 ~ 70.0 / 45.0 / 0.1 µA/step]
25 Middle/2nd/-128
[0 ~ 70.0 / 45.0 / 0.1 µA/step]
26 Thick/2nd/-297
[0 ~ 70.0 / 28.0 / 0.1 µA/step]
27 Thick/2nd/257-296
[0 ~ 70.0 / 32.0 / 0.1 µA/step]
28 Thick/2nd/210-256
[0 ~ 70.0 / 36.0 / 0.1 µA/step]
29 Thick/2nd/129-209
[0 ~ 70.0 / 40.0 / 0.1 µA/step]
30 Thick/2nd/-128
[0 ~ 70.0 / 44.0 / 0.1 µA/step]
31 OHP/297
[0 ~ 70.0 / 24.0 / 0.1 µA/step]
314*
32 OHP/210
[0 ~ 70.0 / 36.0 / 0.1 µA/step]
Paper Trans_Col (Paper Transfer Correction)
The display indicates: Paper Type/Side 1 or 2/Printing mode
1 Normal/1st/1 Color
Corrects the electric current for paper transfer. DFU
[0 ~ 100 / 45 / 1%/step]
2 Normal/1st/2 Colors
[0 ~ 100 / 90 / 1%/step]
3 Normal/1st/3 Colors
[0 ~ 100 / 100 / 1%/step]
4 Normal/2nd/1 Color
[0 ~ 100 / 45 / 1%/step]
5 Normal/2nd/2 Colors
[0 ~ 100 / 90 / 1%/step]
6 Normal/2nd/3 Colors
[0 ~ 100 / 100 / 1%/step]
7 Thick/1st/1 Color
[0 ~ 100 / 45 / 1%/step]
8 Thick/1st/2 Colors
[0 ~ 100 / 90 / 1%/step]
9 Thick/1st/3 Colors
[0 ~ 100 / 100 / 1%/step]
10 Thick/2nd/1 Color
[0 ~ 100 / 45 / 1%/step]
11 Thick/2nd/2 Colors
[0 ~ 100 / 90 / 1%/step]
12 Thick/2nd/3 Colors
[0 ~ 100 / 100 / 1%/step]
13 OHP/1 Color
[0 ~ 100 / 60 / 1%/step]
14 OHP/2 Colors
[0 ~ 100 / 90 / 1%/step]
320*
15 OHP/3 Colors
[0 ~ 100 / 100 / 1%/step]
Paper Transfer Bias of Edge
1
Normal/1st/Leading
edge
2
Normal/2nd/Leading
edge
3
Thick/1st/Leading
edge
4
Thick/2nd/Leading
edge
5 OHP/Leading edge
321
6
Normal/1st/Trailing
edge
Adjusts the paper transfer current at the paper edges.
[10.0 ~ 20.0 / 10.0 / 0.1 times/step] DFU
The specified values indicate how many times larger the
current at the edge is.
To Next Page
Loading...
