EasyManua.ls Logo

Ricoh U-C1 B051 - Page 197

Ricoh U-C1 B051
343 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE PROGRAM MODE 26 July 2002
5-22
3
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
15 gamma Y
[–30000 ~ 30000 / 2000 / 1 /step]
16 Gamma K
[–30000 ~ 30000 / 5000 / 1 /step]
17 Invariable-M
[–3000 ~ 3000 / 150 / 1 /step]
18 Invariable-C
[–3000 ~ 3000 / 150 / 1 /step]
19 Invariable-Y
[–3000 ~ 3000 / 150 / 1 /step]
20 Invariable-K
[–3000 ~ 3000 / 0 / 1 /step]
21 OPC Target M
[400 ~ 2000 / 600 / 1 /step]
22 OPC Target C
[400 ~ 2000 / 620 / 1 /step]
23 OPC Target Y
[400 ~ 2000 / 570 / 1 /step]
24 OPC Target K
[400 ~ 2000 / 850 / 1 /step]
25 Charge V Offset M
[100 ~ 600 / 280 / 1 /step]
26 Charge V Offset C
[100 ~ 600 / 280 / 1 /step]
27 Charge V Offset Y
[100 ~ 600 / 280 / 1 /step]
28 Charge V Offset K
[100 ~ 600 / 280 / 1 /step]
29 ID sensor Target 1M
[0 ~ 5000 / 1400 / 1 /step]
30
ID sensor Target 1
Color
[0 ~ 5000 / 1400 / 1 /step]
31 ID sensor Target 1Y
[0 ~ 5000 / 1400 / 1 /step]
32 ID sensor Target 2M
[0 ~ 1000 / 200 / 1 /step]
33
ID sensor Target 2
Colors
[0 ~ 1000 / 200 / 1 /step]
34 ID sensor Target 2Y
[0 ~ 1000 / 200 / 1 /step]
35 ID sensor Target 2K
[0 ~ 2000 / 1200 / 1 /step]
36
Color Development
Bias
[50 ~ 300 / 100 / 1 /step]
37 Bk Development Bias
[50 ~ 300 / 50 / 1 /step]
38 Bias Charge
[0 ~ 1000 / 20 / 1 /step]
52 Absolute Temperature
[0 ~ 200 / 150 / 1 /step]
53 Previous Temperature
[0 ~ 100 / 15 / 1 /step]
002
54 Timer Counter
[0 ~ 5000 / 1440 / 1 /step]
Lubricant Interval 003*
1 Lubricant Interval Sets the process control interval.
[0 ~ 1000 / 200 / 10 sheet/step]
0: Disables automatic process control
Environment Change
1 Temperature
Sets the temperature/humidity change that triggers
process control (process control is done if temperature
or humidity has changed by this amount since the
previous process control).
[0 ~ 100 / 15 / 1°C/step]
004*
2 Humidity
[0 ~ 100 / 150 / 1 g/m
3
/step]
Process control Pre-Rotate 005*
1
Process control Pre-
Rotate
PCU and development unit idling is done before process
control. This value determines the amount of idling
rotation.
[1 ~ 5 / 1 / 1 turn/step]
1 turn: A3 length

Table of Contents

Related product manuals