Ricoh U-C1 B051 - Page 205

SERVICE PROGRAM MODE 26 July 2002
5-30
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Optional Counter Type 113
1 Optional Counter Type Determines the type of accounting device.
[0 ∼ 9 / 0 / 1 /step]
• 0: None
• 1: Key card (RK2, RK3, RK4)
• 2: Key card (subtracting)
• 3: Prepaid card
• 4: Coin lock
• 5: MF key card
• 6: (not used)
• 7: (not used)
• 8: Key counter (excluding vendors)
• 9: Barcode printer
Disable copying 118
[0 ∼ 1 / 1 / 1 /step]
0: Copying enabled
1: Copying disabled
Counter Up Timing 121
1 Counter Up Timing Selects the accounting timing.
[0 ∼ 1 / 0 / 1 /step]
• 0: Paper feed
• 1: Paper exit
SP5-121 affects only the timing for sending signals to
the accounting device. The counters for other units or
devices are not affected.
F Original Size 126
1 F Original Size Specifies the type of F-size paper.
[0 ∼ 2 / 0 / 1 /step]
• 0: 8
1/2" x 13" SEF
• 1: 8
1/4" x 13" SEF
• 2: 8" x 13" SEF
APS Mode 127
1 APS Mode
Enables or disables the APS (Auto Paper Selection)
mode.
[0 ∼ 1 / 0 / 1 /step]
• 0: Enables
•
1: Disables
Combination (Op. Counter) 128
1
Combination (Op.
Counter)
[0 ∼ 1 / 0 / 1 /step] DFU
• 0:
• 1:
Page Numbering
3
Duplex Printout
Right/Left Position
212
4
Duplex Printout
High/Low Position
Adjusts the positions of page numbers.
[–99 ∼ 99 / 0 / 1 mm/step]