Instrument Functions
R&S
®
FSVA/FSV
191Operating Manual 1176.7510.02 ─ 09
Label Description
Data Sheet Version Data sheet version of the basic device
<option> Installed hardware and firmware options
Note that B99 indicates the R&S FSVA models (as opposed to the
R&S FSV models).
For details on options refer to the Quick Start Guide, chapter 2 "Checking the Supplied
Items".
Remote command:
*IDN? on page 608
*OPT? on page 609
SYSTem:DEVice:ID? on page 964
SYSTem:DID? on page 964
System Messages ← System Info
Opens the "System Messages" dialog box that displays the generated system mes-
sages in the order of their occurrence. The most recent messages are placed at the
top of the list. Messages that have occurred since the last display of system messages
menu are marked with an asterisk '*'. The following information is available:
No device-specific error code
Message brief description of the message
Component hardware messages: name of the affected module
software messages: name of the affected software
Date/Time date and time of the occurrence of the message
If the number of error messages exceeds the capacity of the error buffer, "Message
buffer overflow" is displayed. To delete messages see "Clear All Messages"
on page 191 softkey.
Remote command:
SYSTem:ERRor:LIST? on page 965
Clear All Messages ← System Info
Deletes all system messages. The softkey is only available if the "System Messages"
dialog box is displayed.
Remote command:
SYSTem:ERRor:CLEar:ALL on page 965
Firmware Update
Opens the "Firmware Update" dialog box.
Enter the name of or browse for the firmware installation file and press the "Execute"
button. For details on installation refer to the Quick Start Guide, chapter 3 "Firmware
Update and Installation of Firmware Options".
Only user accounts with administrator rights can perform a firmware update.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
