Rohde & Schwarz R&S SMB100B - Page 163

Improving level performance
R&S
®
SMB100B
163User Manual 1178.3711.02 ─ 08
"Dwell /s"
In list mode, sets the dwell time values.
Remote command:
[:SOURce<hw>]:LIST:DWELl:LIST on page 478
Data handling keys
Standard functions for file and data handling.
Go To ← Data handling keys
Selects a row for editing.
Edit ← Data handling keys
Enables you to insert, or delete a row or ranges within a list, and provides access to a
dialog for automatic filling, see "Fill..." on page 93.
Fill with Sensor ← Data handling keys
Opens a dialog to configure the automatic filling of user correction data with an R&S
NRP power sensor. Available in UCOR mode only.
See Chapter 7.3.3, "Fill with sensor", on page 164
Save As/Save ← Data handling keys
Stores the list in a file with user-defined name and predefined file extension. To save a
copy or create a file, use the "Save as" function.
Fill...
Provides parameters for filling a table automatically with user-defined values.
To fill the table, select "Fill".
Note: Once you enter a value or fill a column, the editor automatically adds preset val-
ues in the other columns. This functionality protects against data loss, otherwise
incomplete rows will be lost when saving. You can simply override these values.
User correction