Rohde & Schwarz R&S SMB100B - Page 433

Remote control commands
R&S
®
SMB100B
433User Manual 1178.3711.02 ─ 08
Always create and select pulse train data list first before you activate the pulse train
mode.
Otherwise, an error is displayed
*RST; *CLS
// Set the RF signal frequency and level
SOURce:FREQuency:CW 4000000000
SOURce:POWer:LEVel:IMMediate:AMPLitude -25
// Create a pulse train data list
// Select the directory
MMEM:CDIR '/var/user/'
SOURce1:PULM:TRAin:CATalog?
// my_pt
// Create and7or select the pulse train data file
SOURce1:PULM:TRAin:SELect "/var/user/pt"
// Enter the pulse train data
SOURCe:PULM:TRAin:ONTime 0.0001,0.00025,0.0001
SOURCe:PULM:TRAin:OFFTime 500us,500us,300us
SOURCe:PULM:TRAin:REPetition 2,0,3
// the second pulse is ignored
// Select pulse train mode
// Select the internal modulation generator and the pulse mode
SOURce1:PULM:SOURce INT
SOURce1:PULM:MODE PTR
SOURce1:PULM:TRIGger:MODE EXT
SOURce1:PGENerator:OUTPut:STATe 1
SOURce1:PGENerator:OUTPut:POLarity NORM
SOURce:PGENerator:OUTPut:STATe 1
SOURce:PULM:STATe 1
OUTPut1:STATe 1
// SOURce1:PULM:TRAin:CATalog?
// my_pt, pt
// SOURce1:PULM:TRAin:DEL "/var/user/my_pt"
The following commands are available:
[:SOURce<hw>]:PULM:TRAin:CATalog?.......................................................................... 434
[:SOURce<hw>]:PULM:TRAin:DELete............................................................................. 434
[:SOURce<hw>]:PULM:TRAin:ONTime............................................................................ 434
[:SOURce<hw>]:PULM:TRAin:OFFTime...........................................................................434
[:SOURce<hw>]:PULM:TRAin:REPetition:POINts?............................................................435
[:SOURce<hw>]:PULM:TRAin:ONTime:POINts?............................................................... 435
[:SOURce<hw>]:PULM:TRAin:OFFTime:POINts?............................................................. 435
[:SOURce<hw>]:PULM:TRAin:REPetition.........................................................................435
[:SOURce<hw>]:PULM:TRAin:SELect..............................................................................435
SOURce subsystem