Rohde & Schwarz R&S SMB100B - Page 434

Remote control commands
R&S
®
SMB100B
434User Manual 1178.3711.02 ─ 08
[:SOURce<hw>]:PULM:TRAin:CATalog?
Queries the available pulse train files in the specified directory.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example"Generating a pulse train signal" on page 432.
Usage: Query only
Manual operation: See "Pulse Train Data" on page 92
[:SOURce<hw>]:PULM:TRAin:DELete <Filename>
Deletes the specified pulse train file.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See Example"Generating a pulse train signal" on page 432.
Usage: Setting only
Manual operation: See "Pulse Train Data" on page 92
See "Edit Pulse Train Data" on page 93
[:SOURce<hw>]:PULM:TRAin:ONTime <OnTime>
[:SOURce<hw>]:PULM:TRAin:OFFTime <OffTime>
Enters the pulse on/off times values in the selected list.
Parameters:
<OffTime> Offtime#1{, Offtime#2, ...} | binary block data
List of comma-separated numeric values or binary block data,
where:
The list of numbers can be of any length.
In binary block format, 8 (4) bytes are always interpreted as a
floating-point number with double accuracy.
See :FORMat[:DATA] on page 387 for details.
The maximum length is 2047 values.
Range: 0 ns to 5 ms
Example: See Example"Generating a pulse train signal" on page 432.
Manual operation: See "Edit Pulse Train Data" on page 93
SOURce subsystem