Rohde & Schwarz R&S SMB100B - Page 530

Remote control commands
R&S
®
SMB100B
530User Manual 1178.3711.02 ─ 08
Example: See Example"Retrieving information on network-related set-
tings" on page 518.
Manual operation: See "MAC Address" on page 289
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example"Finding out VISA resource strings" on page 518.
Usage: Query only
Manual operation: See "VXI11" on page 290
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
See Example"Restarting the network" on page 518.
Usage: Event
Manual operation: See "Restart Network" on page 287
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State> 1 | ON | 0 | OFF
Example: See Example"Retrieving information on network-related set-
tings" on page 518.
Usage: Query only
Manual operation: See "Network Status" on page 287
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain <Domain>
Determines the primary suffix of the network domain.
Parameters:
<Domain> string
Example: See Example"Retrieving information on network-related set-
tings" on page 518.
Manual operation: See "DNS Suffix" on page 289
SYSTem subsystem