Rohde & Schwarz SMBV100A - Page 624

Remote Control Commands
R&S
®
SMBV100A
609Operating Manual 1176.8016.02 ─ 17
[:SOURce<hw>]:BB:ARBitrary:TRIGger:DELay:UNIT <TrigDelUnit>
Determines the units the trigger delay is expressed in.
Parameters:
<TrigDelUnit> SAMPle | TIME
*RST: SAMPle
Manual operation: See "External Delay Unit" on page 393
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:DELay <Delay>
The command specifies the trigger delay (expressed as a number of samples) for
external triggering.
Parameters:
<Delay> float
Range: 0 to depends on other values
Increment: 0.01
*RST: 0
Default unit: sample
Example:
BB:ARB:TRIG:SOUR EXT
selects an external trigger
BB:ARB:TRIG:DEL 200
sets a delay of 200 samples for the trigger.
Manual operation: See "Trigger Delay" on page 393
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<ExtTimeDelay> float
Range: 0 to 688
Increment: 1E-9
*RST: 0
Default unit: s
Manual operation: See "Trigger Delay" on page 393
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
SOURce Subsystem