3. Manually set the time or use NTP to set the system time.
4. Under the Autokey tab of the Edit NTP Services window, enable:
Enable Autokey—Check the box.
Autokey Passphrase—Enter your Group members NTP Autokey pass-
word.
Select Certificate Type to Generate—Do NOT enable Server
5. Using the NTP Server containing the IFF Group/Common Key generate a
Client Key using this NTP Server’s passphrase.
6. Cut and paste the Client Key into the Autokey Groupkey text box.
7. For all NTP Stratum-2 servers and higher stratum numbers, disable the fol-
lowing items under the Stratum-1 tab in the Edit NTP Services window:
Prefer Stratum 1.
Enable Stratum-1 1PPS.
8. In the NTP Servers panel of the main window, add an NTP server and
enable the Autokey option box. See "NTP Servers: Adding, Configuring,
Removing" on page121.
9. Enable NTP in the NTP Services panel.
10. Wait for NTP to synchronize to the NTP References provided.
Creating a Stratum-1 Client Only Server
To create an NTP Stratum-1 'Client Only' Server with a Client key:
1. Define the Hostname, making sure that it is different from its trusted group
server. See "NTP Servers: Adding, Configuring, Removing" on page121.
2. Disable NTP if enabled.
3. Manually set the time or use NTP to set the system time.
4. Under the Autokey tab of the Edit NTP Services window, enable:
Enable Autokey—Check the box.
Autokey Passphrase—Enter your Group members NTP Autokey pass-
word.
Select Certificate Type to Generate—Select Client to enable Client
only.
5. Using the NTP Server containing the IFF Group/Client Key, copy the
Group/Client key.
6. Paste this Group/Client key into the Autokey Groupkey text box.
130
CHAPTER 2 • VersaSync User Manual Rev. 12
2.8 Configuring Network Settings
To Next Page
Loading...
