13
Connecting cables or
optional devices
• Before connecting a cable or optional device to the product, be
sure to power off the product and the optional devices. If they
are connected with the power on, an optional device could move
unexpectedly, resulting in injury, electric shock, or damage.
• When installing a cable or optional device, be sure not to make a
mistake in the orientation and steps to install. Otherwise, it could
result in injury, fire, electric shock, or damage.
• Do not use cables other than the ones supplied with the product or
recommended by us. Doing so could result in smoke, fire, electric
shock, or damage.
Do not operate with
wet hands
• Do not power on/power off the product or plug/unplug the power cord
and other cables with wet hands. Doing so could result in electric
shock or damage.
Do not disassemble
the product
• Do not disassemble or modify the product. Doing so could result in a
fire or electric shock. Ask your SATO reseller or technical support to
conduct internal inspections, adjustments, and repairs.
Using the cleaning
fluid
• Do not use cleaning fluids other than the ones supplied with the
product or recommended by us.
• The cleaning fluid is to be strictly kept away from the fire. Never apply
heat or place it in the fire.
• Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Do not touch or insert
any object in the cutter
• Do not touch the cutter with your hands or insert foreign objects other
than media into the cutter. Doing so could result in injury.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
