333
Specifies the number of cut times of the cutter for the timing to perform the periodic notification. You
will be notified for each number of cut times you specify.
The setting range is from 1 to 1000000.
[Notifications] (SOS users only)
Specifies the number of periodic notifications to be sent per day.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Daily] in the [Type] menu.
The setting range is from 1 to 3.
[Weekday] (SOS users only)
Specifies the day of the week to perform the periodic notification.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Weekly] in the [Type] menu.
The setting range is from Sunday to Saturday.
To Next Page
Loading...
