SATO CL4NX Plus - Page 332

[Network]
332
The setting range is from 1 to 100,000.
[Cutter] (SOS users only)
You can specify or check the number of cut times of the cutter for the timing to perform the periodic
notification.
Appears only if you have selected [Cutter] or [Head+Cutter] for [Counter] in the [Type] menu.
The setting items are as follows:
Cuts
Specifies the number of cut times of the cutter for the timing to perform the periodic notification.
Last Update
Shows the number of cut times of the cutter for the last periodic notification.
Next Update
Shows the number of cut times of the cutter for the next periodic notification.
Current Value
Shows the current number of cut times of the cutter.
[Cuts] (SOS users only)