[Network]
338
Set the correction value from the standard printing position as "+" for the direction opposite to the
media feed and "-" for the direction of the media feed.
(1) Feed direction
The setting range is from -792 to +792 dots.
• The length of 1 dot varies depending on the print resolution of the product.
◦ 203 dpi : 1 dot = 0.125 mm (0.0049")
◦ 305 dpi : 1 dot = 0.083 mm (0.0033")
◦ 609 dpi : 1 dot = 0.042 mm (0.0017")
[Horizontal] (SOS users only)
Adjust the print position of the QR code for SOS (SATO Online Services) in the horizontal direction.
To Next Page
Loading...
