SATO CL4NX Plus - Page 357

357
[Baudrate]
Set the baudrate (bps).
Available to change only if you have selected [RS-232C] in the [Tools] > [Barcode Checker] > [Test] >
[Interface] menu.
The options are as follows:
• [2400]
• [4800]
• [9600]
• [19200]
• [38400]
• [57600]
• [115200]
[Parameters]
Set the data parameters.
Available to change only if you have selected [RS-232C] in the [Tools] > [Barcode Checker] > [Test] >
[Interface] menu.
The options are as follows: