359
[Flow Control]
Set the communication protocol.
Available to change only if you have selected [RS-232C] in the [Tools] > [Barcode Checker] > [Test] >
[Interface] menu.
The options are as follows:
• [READY/BUSY Multi]
• [XON/XOFF Multi]
• [STATUS4]
• [STATUS3]
• [STATUS5]
• [None]
[BCC]
Enable or disable the BCC check function.
Appears only if you have selected [RS-232C] in the [Tools] > [Barcode Checker] > [Test] > [Interface]
menu and if you have selected [STATUS5] in the [Flow Control] menu.
The options are as follows:
To Next Page
Loading...
