SATO CL4NX Plus - Page 416

[SDPL]
416
Enable or disable TrueType font compatible mode.
The options are as follows:
Enabled
Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.
Disabled
Disable TrueType font compatible mode.
[Graphics]
Set whether to allow the registration of graphic data even if a line feed code is omitted.
The options are as follows:
Enabled
Allow the registration of graphic data even when a line feed code is omitted.
Disabled
Do not allow the registration of graphic data when a line feed code is omitted.
[Compression]
Set whether to accept graphic data created by a unique compression method.