[Notifications]
448
The options are as follows:
Enabled
Enable the notification function.
Disabled
Disable the notification function.
[Cleaning Interval]
Set the notification interval about when the print head needs to be cleaned.
You can change this setting if you have selected [Enabled] in the [Clean Printhead] menu.
The product shows the print distance as a set value. The setting range is from 10 to 1000 meters.
[Change Printhead]
Notify when the print head needs to be replaced.
The setting items are as follows:
Change Printhead
Enable or disable the notification function about when the print head needs to be replaced.
To Next Page
Loading...
