SATO CL4NX Plus - Page 449

449
Printhead Interval
Set the notification interval about when the print head needs to be replaced.
Printhead Count
Shows the current print distance.
[Change Printhead]
Enable or disable the notification function about when the print head needs to be replaced.
The options are as follows:
Enabled
Enable the notification function.
Disabled
Disable the notification function.
[Printhead Interval]
Set the notification interval about when the print head needs to be replaced.
You can change this setting if you have selected [Enabled] in the [Change Printhead] menu.
The product shows the print distance as a set value. The setting range is from 10 to 100 km.