[HEX-Dump]
480
[Remove]
Delete the log files of the product.
The procedure to delete the log files is as follows:
1.
Select the file type to delete and press the button.
◦ buff/
The buffer data saved when you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2.
Select the file to delete and press the button. A check mark appears on the right side of the
file name.
3.
After you select the file, press the button to delete the selected file.
• When [Hex Dump Mode] is set to [Enabled], it may take some time before the files
appear.
To Next Page
Loading...
