SATO CL4NX Plus - Page 745

745
Item CL4NX Plus
Storage Humidity 30 to 90% RH (Non-condensing)
Print
Item CL4NX Plus
Print Method Direct thermal and thermal transfer
Print Speed
203/305 dpi
2 to 14 inches/sec (50.8 to 355.6 mm/sec)
* Maximum is 10 inches/sec (254 mm/sec) in dispenser mode.
609 dpi
2 to 6 inches/sec (50.8 to 152 mm/sec)
Linerless mode
2 to 6 inches/sec (50.8 to 152 mm/sec)
Resolution (Head
Density)
• 203 dpi (8 dots/mm)
• 305 dpi (12 dots/mm)
• 609 dpi (24 dots/mm)
Non-printable Area Pitch direction (Excludes liner)
Top
1.5 mm (0.06")
Bottom
1.5 mm (0.06")
Width direction (Excludes liner)
Left
1.5 mm (0.06")
Right
1.5 mm (0.06")
Printable Area
203 dpi
Length 2500 mm (98.42")
x Width 104 mm (4.09")
305 dpi
Length 1500 mm (59.05")
x Width 104 mm (4.09")