SATO CL4NX Plus - Page 746

Hardware
746
Item CL4NX Plus
609 dpi
Length 400 mm (15.75")
x Width 104 mm (4.09")
Print End Position
203 dpi (1 dot = 0.125 mm (0.0049"))
1 to 20000 dots
305 dpi (1 dot = 0.083 mm (0.0033"))
1 to 18000 dots
609 dpi (1 dot = 0.042 mm (0.0017"))
1 to 9600 dots
Print Darkness
Darkness level
1 to 10
Darkness range
A
Sensors
Item CL4NX Plus
I-mark (Reflective
Type)
Position and sensitivity
Adjustable
Gap (Transmissive
Type)
Position and sensitivity
Adjustable
Head Open Fixed
Paper End Sensor Detect with I-mark sensor or Gap sensor
Label Near End Fixed
Ribbon End/Ribbon
Near End
Fixed
Dispenser Fixed
• If linerless cutter kit or dispenser unit is installed.
Cutter Fixed
• If cutter unit or linerless cutter kit is installed.