LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-51 April, 2014
of 128 pages
5. If Daylight Saving Time is not to be used:
a. Press the Up or Down triangle to move the selection bar to Disabled.
b. Press Enter, which inhibits Daylight Saving Time and returns the system
to the Supervisor Menu.
6. If Daylight Saving Time is to be used:
a. Press the Up or Down triangle to move the selection bar to Enabled.
b. Press Enter, which selects Daylight Saving and returns the system
to the Supervisor Menu.
To Next Page
Loading...
