LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-85 April, 2014
of 128 pages
Note: The Horizontal Adjustment can not be changed on the Default
Configuration.
5. The Horizontal Adjustment can be increased or decreased in 2 different ways:
Enter the new adjustment on the numeric keypad and then press Enter.
or
Move the Up or Down triangle (to increase or decrease the alignment)
and then press Enter.
6. Pressing Enter after the change has been made stores the change and returns
the system to the Offline Print menu.
7. Press the ONLINE switch to restart document printing.
To Next Page
Loading...
