SATO LP 100R - Page 238

LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-124 April, 2014
of 128 pages
Note:
 Brackets ( [ ] ) around a specific Paper Suction setting indicate that it is the
Default Paper Suction setting.
 An arrow () pointing to a specific Paper Suction setting indicates that it is
the setting assigned to the current configuration.
3. Press the Up or Down triangle to move the selection bar to the desired Paper
Suction setting.
4. Press Enter to save the Paper Suction setting selected.
Note:
 Pressing Enter after any Printer Setup function has been executed saves the
function. However, it does not store the function
 When the configuration completes, press Back until the Store Configuration
screen displays, and then follow the procedures for executing the Store
function (see page 6-63).