LP 100R Laser Printer Operator's Guide Appendix B: Managing Files
Rev: 1 Page B-50 April, 2014
of 60 pages
12. If the Copy function is to be aborted, press Back, which will cause the system
to return to the Files menu without executing the Copy function.
13. If the Copy function is not to be aborted:
a. Open the front door on the printer.
b. Insert the flash drive into the USB port on the front of the controller.
c. Close the front door on the printer.
14. Press Enter to start the Copy function.
15. When the Copy function is complete, the system returns to the Files menu.
16. Open the front door on the printer and remove the flash drive from the USB
port.
17. Close the front door on the printer.
18. Label the flash drive with the file name and software version.
19. Store the flash drive in a safe place.
To Next Page
Loading...
