LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-6 April, 2014
of 24 pages
5. Pull out the transfer/separator charger cleaning lever (bottom) slowly as far as
it will come.
Note: When pulling out or inserting the transfer/separator lever, use caution
to avoid bending it.
6. Insert the transfer/charger cleaning lever (bottom) to its original position.
Note: If the transfer/charger lever is not completely inserted, the print image
may be light.
7. Repeat steps 5 and 6 several times.
8. Close the front door.
To Next Page
Loading...
