SATO LP 100R - Page 82

LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-22 April, 2014
of 24 pages
5. Remove the OPC drum.
Note:
 To avoid damages, do not touch the OPC drum.
 Use the supplied cleaning pad or other suitable item to shield the OPC
drum. Exposing it to light for more than a brief period of time results in
degradation.
6. Remove the cleaning blade by loosening one screw.
Note: Be careful of the edge of the paper separator fingers.
7. Install the cleaning blade by tightening one screw.
! CAUTION
NEVER touch the edge of the blade with your hands.
Also, do not hit or rub the edge of the blade with a hard object.
OPC
drum
Cleaning pad
Screw
Cleaning blade
Screw
Cleaning blade