Siemens FS20 - Restarting and Resetting the FN2012-A1

Commissioning Ethernet switch (modular) FN2012
-
A1
Restarting and resetting the FN2012
-
A1
24
110 | 188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
24.4 Restarting and resetting the FN2012-A1
Via the web interface
You can perform the following resets on the 'Product' tab:
● Restart device: Click on 'Reset device'.
– The configuration is retained.
● Resetting the device to factory settings: Click on 'Factory reset'.
On the device
● Restart device: Press the RESET button.
– The configuration is retained.
● Resetting the device to factory settings: Press the RESET button for >5 s but
<10 s.
Resetting the FN2012
-
A1
to the factory setting automatically activates all ports.
The FN2012
-
A1 has no IP address in the factory setting.