Siemens FS20 - Assign IP Address

Commissioning Ethernet switch (MM) FN2008
-
A1
Assign IP address
22
93 |
188
Building Technologies
009052_s_en_
--
Fire Safety
2016
-
06
-
02
22.2 Assign IP address
The
FN2008
-
A1 is displayed as X204
-
2 in Primary Setup Tool.
ϖ Primary Setup Tool is installed on the PC.
ϖ Several FN2008-A1 are physically linked in the system.
1. Connect the PC to any available FN2008-A1 port P1…P4 using a network
cable.
2. Start the Primary Setup Tool via 'Start' > 'Programs' > 'Simatic'.
 Primary Setup Tool lists one or more FN2008-A1 (X204-2).
3. Select each FN2008-A1 one after the other and issue a unique IP address
(192.168.1.xxx) to each FN2008-A1.
4. Click on the connected FN2008-A1 in the tree view and select the 'Load' menu
item.
 The assigned IP address is saved to the FN2008-A1.
5. Repeat the 'Load' process for each FN2008-A1.
 Each FN2008-A1 in the system has an individual IP address.